Alphasonik NA4000D Monoblock 4000W Max Class-D Car Amplifier w/ Remote Bass Knob

Alphasonik Monoblock Amplifier Neuron Series NA4000D The NEURON Series of Amplifiers from Alphasonik will leave you astonished when you experience the power deliverance of these amplifiers. Not only did they accomplish the power that is needed and desired with all the benefits of the bells & whistles that come along with it. Things like 4-way protection circuitry against thermal, short circuit, overload and DC offset and RCA throughputs to add more amplifiers. Nickel-plated terminal blocks have been used on the NEURON series amplifiers. Since most cable is stranded, it is necessary to use terminal blocks to hold the strands together in fastening the connections. A heatsink size is not the only way to cool down an amplifier. Having increased the area of the heatsink increases the cooling dramatically. So, we extruded the heatsink so we can get the most advantageous area to aid the cooling efficiency. Features • RMS 4 Ohms: 1000 Watts x 1 • RMS 2 Ohms: 2000 Watts x 1 • RMS 1 Ohm: 4000 Watts x 1 • Terminal: Nickel Plated • Input Signal: Low Level & High-Level Inputs • Output Signal: No • Remote Bass Knob: Yes • Amplifier Protection: Thermal, Short Circuit, Overload and DC Offset • Low Pass Crossover: 50 Hz - 250Hz • Variable Input Sensitivity: 200mV - 6V • Frequency Response: 10Hz - 250Hz • Bass Boost: 0 - 12dB • S/N Ratio: >90dB (+/-3dB) • Fuse Rating: ATC 40A x 3 • 4-way protection circuitry: Thermal, Short circuit, Overload and DC offset • Military spec double-sided glass epoxy FR4 circuit board • Nickel plated terminal blocks • Remote bass knob

• High-Level Inputs
  High-Level Inputs are an added bonus of having the capability of using the source units speaker outputs. Having High-Level Inputs is needed if your source unit doesn’t have Low-Level Outputs. Tap into the rear decks speakers and you’re all set! Eliminating the need for a Hi to Low Converter.
• Nickel Plated Terminal Block
  Nickel-plated terminal blocks have been used on the NEURON series amplifiers. Since most cable is stranded, it is necessary to use terminal blocks to hold the strands together in fastening the connections. This type of terminal block maximizes the connection to deliver the voltage and current draw needed.
• Extruded Heat Sink
  Keeping the amplifier cool increases the efficiency to an amplifier. To keep an amplifier cool is a combination of several things, but the most important two are power output and heatsink size. A heatsink size is not the only way to cool down an amplifier. Having increased the area of the heatsink increases the cooling dramatically. So, we extruded the heatsink so we can get the most advantageous area to aid the cooling efficiency.
• Remote Bass Knob
  External bass controller that will allow you to adjust the bass level remotely without having to retune the amplifier. This is a perfect solution to increase and decrease the bass when you have a wide variety of music genres. Giving you the ability to adjust the bass song by song.

• Specifications:

  • RMS 4 Ohms: 1000 Watts x 1
  • RMS 2 Ohms: 2000 Watts x 1
  • RMS 1 Ohm: 4000 Watts x 1
  • Terminal: Nickel Plated
  • Input Signal: Low Level & High-Level Inputs
  • Output Signal: No
  • Remote Bass Knob: Yes
  • Amplifier Protection: Thermal, Short Circuit, Overload and DC Offset
  • Low Pass Crossover: 50 Hz - 250Hz
  • Variable Input Sensitivity: 200mV - 6V
  • Frequency Response: 10Hz - 250Hz
  • Bass Boost: 0 - 12dB
  • S/N Ratio: >90dB (+/-3dB)
  • Fuse Rating: ATC 40A x 3